Watco® teak oil is specifically formulated for dense woods such as teak, rosewood or mahogany. Watco® teak oil penetrates deep into wood pores to create the rich, warm glow of a hand rubbed finish. It takes less than an hour to treat your wood with Watco® teak oil, simply brush or wipe-on and wipe off. Watco® teak oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using.
| Id | 161967 |
| SKU | 3871795 |
| PartNo | 67131 |
| UPC | 026748067136 |
| Net Content | 1 Gal |
| Container Type | Can |
| Form | Liquid |
| Sheen | Flat, Matte |
| Compositions | Naphtha, Petroleum, Hydrotreated Light, Rosin Adduct Ester, Stoddard Solvent, Solvent Naphtha, Light Aromatic, Mineral Spirits, Methanol, 3-Iodo-2-Propynyl Butyl Carbamate, Bis(1, 2, 2, 6, 6-Pentamethyl-4-Piperidinyl) Sebacate, Methyl Ethyl Ketoxime |
| Viscosity | 25 CPs |
| Vehicle Type | Oil Phenolic Rosin Ester |
| Coverage Area | 560 To 575 Sq-ft/gal |
| VOC Content | 450 G/L |
| Application Method | Brush, Roller, Spray |
| Flash Point | 49 Deg C |
| Boiling Point | -18 To 316 Deg C |
| Flammability Rating | 2 |
| Temperature Rating | <49 Deg C |
| Specific Gravity | 0.862 |
| Applicable Materials | Wood |
| Drying Time | 8 Hr |
| CID | 9 |
R.P. Lumber - Edwardsville, IL